Page 5For technical questions, please call 1-888-866-5797.Item 58966
Assembly
1. Pull Clips outward, then remove
Power Head by its Handle.
Clip
Clip
Power Head Handle
2. For dry vacuuming:
a. Slide HEPA Filters over Cage.
b. Secure filters by turning clockwise until
tight. Do not use excessive force.
c. When vacuuming fine dust, install
Dust Bag by placing it inside of Tank
and connecting to Vacuum Port.
Filters
3. For wet vacuuming: Remove Filters and Dust Bags.
4. Replace Power Head with Power Switch
facing forward. Secure with Clips.
5. Insert end of Hose into Vacuum Port
and rotate until locked in place.
Vacuum
Port
Hose
6. Add Extension Wand(s) and Nozzles as needed.
7. Attaching power tools to Dust Extractor:
a. Attach power tool to Step Adapter, OR
b. Remove Step Adapter from Hose and
attach Power Tool Adapter to Hose.
Hose
Step
Adapter
Power Tool
Adapter
To Next Page
Loading...