BLUETOOTH CONNECTIVITY
(ONLY FOR BLUETOOTH VERSION)
WARRANTY
www.Herdiotech.com
3
1.Make sure the Bluetooth Ceiling Speaker system is properly
connected to a power Source, and speaker wires are connected
correctly.
2.Power ON the speaker system, and you shall hear hear a tone
indicating the Bluetooth system is ready for pairing.
3.Then, go to your Smart device's Bluetooth Network Settings, The
Bluetooth Network Name will appear as ' Herdio' on your device
list, and click for connection. No password is required to connect
but if you are prompted enter '0000' (4 zeroes).
4.You shall hear another indication tone when a successful
Bluetooth connection is established, then you are ready to enjoy the
music.
All Herdio speaker products have 1 year Limited Warranty
against defects in materials and workmanship. Proof of
purchase must accomp any all claims. During the warranty
period Herdio will replace any defective part and correct
any defect in workmanship without charge for either parts
or labor.
To Next Page
Loading...
