TECHNICAL SPECIFICATIONS
www.Herdiotech.com
4
Outside Facial Diameter:
Mounting Hole Diameter:
Mounting Depth:
Impedance:
Frequency Response:
Power Handling(Max):
Magnet Material:
SPL(1Watt / 1Meter):
Product Material:
7.28*7.28"(185*185mm)
5.87*5.87"(149*149mm)
2.83"(72mm)
8 Ohms
80Hz-20kHz
80 W
8 Oz
89 dB
Molded ABS Plastic Basket
1.Cut the drywall. Note: Always allow at least
one-half inch between a wall stud and the
speaker cutout or the locking tabs will not
be able to swivel into place.
2.Connect the speaker wires to the speaker.
3.Screw down each of the four Phillips
head screws. The locking tabs will swivel
into placeand secure the unit to the rear
surface of the drywall. Put in the strips of
adhesive to secure the grile.
4.Press the cover according to the direction
of the picture with the speaker assembly.
INSTALLATION GUIDE:
To Next Page
Loading...
