SAFETY INSTRUCTIONS
Please read the following instructions carefully and completely before installing or
operating your HERO Automatic Colorant Dispenser
I.C.T.C. Holdings Corp/HERO Products Group declines any responsibility should the
following instructions not be followed:
This equipment is designed to be operated indoors only. Do NOT operate outdoors or
in any environment that does not meet the requirements and specifications outlined in
this manual.
Do NOT turn on or operate a damaged machine (for example, if the machine is
damaged during shipping). If in doubt, first contact HERO’s Customer Support Team.
All local, State and Federal safety regulations must be complied with in the
installation and operation of this equipment.
The dispenser and PC must be connected to a dedicated electrical outlet and
circuit with the proper grounding system meeting all the power requirements as
specified on the identification plate.
The owner/operator must maintain the dispenser in good working condition and
replace any broken components in a timely manner.
.
All repairs other than customer maintenance responsibilities must be carried out by
or under the guidance of a qualified technician.
A standard (non-solvent) dispenser is designed and built solely for the purpose of
dispensing water/glycol based colorants. Do NOT use with any solvent based
colorants or any other unauthorized products.
All conditions, instructions and specifications outlined in this manual must be followed
in good faith and any questions or issues must be brought to the attention of a HERO
authorized representative in a timely manner.
To Next Page
Loading...
