Replace tyres immediately when the wear
indicator (1) appears on the tyre. The tread
limits are :
Check the tread wear indicator for tyre wear.
Excessive tread wear.
Cuts, splits or cracks in the tyre. Replace
the tyre if you can see fabric or cord.
Carefully inspect the tyres for any
damage, if the motorcycle hits a pothole
or hard object.
Minimum tread depth Front: 1.5 mm
Look for :
Tread Wear
Rear: 1.5 mm
Bumps or bulges in the side of the tyre
or the tread. Replace the tyre if you find
any bumps or bulges.
Whenever you check the tyre pressure, you
should also examine tyre treads & side
walls for wear, damage & foreign objects:
Inspection
(1) Tyre wear indicator (2) Arrow mark
Repairing a puncture or removing a wheel
requires special tools and technical
expertise. If a tyre is punctured or damaged,
it i s a d vis ed t o vi s it n e ar e st t y re
Tyre Repair
Unidirectional Tyres
Whenever the tyre is removed and put
back in case of puncture, ensure the arrow
mark (2) on the tyre is in the same direction
as that of forward rotation of wheel.
29
To Next Page
Loading...
