EasyManua.ls Logo

HERO IGNITOR - PRE-RIDE INSPECTION; Fluid and Level Checks; Brake System Check; Tyre Condition and Pressure

HERO IGNITOR
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
5. Tyres - check condition and pressure
(page 27)
6. Clutch - check for smooth operation.
Adjust free play (page 51).
7. Drive Chain - check condition and
slackness (page 52). Lubricate if necessary.
12. Fitting & Fasteners - check & tighten if
necessary.
13. Steering - check for smooth action and
for easy maneuverability.
10. Rear View Mirror - ensure that the rear
view mirror gives a good rear view when
you are sitting on the motorcycle.
9. Lamps and Horn - check that headlamp,
position lamp, tail / stop lamp, turn signals,
indicators and horn function properly.
11. Air Suction Valve - make sure all tube
connections are secured properly (page 72).
8. Throttle - check for smooth opening and
closing in all steering positions (page 46).
4. Front Brake (Disc Type) - check for correct
brake fluid level in master cylinder (page 45).
3. Front Brake & Rear Brake - check for
operation and adjust if necessary
(page 56, 59).
1. Engine Oil Level - check and top up engine
oil if required (page 25). Check for leaks.
2. Fuel Level - ensure sufficient fuel is
available in the fuel tank for your
journey (page 19). Check for leaks.

Related product manuals