EasyManua.ls Logo

HERO IGNITOR - RIDING

HERO IGNITOR
97 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This sequence is repeated progressively
rd th th
to shift to 3 , 4 and 5 gear.
When the motorcycle attains a moderate
speed, close the throttle, press the clutch
nd
lever and shift to 2 gear by placing the
toe on the underside of gear pedal and lift
upwards.
34
While the engine is idling, press the
clutch lever and depress the gearshift
pedal downwards using the toe to shift
into 1st gear.
If the engine fails to start after repeated
attempts, it may be flooded with excess
fuel. To clear a flooded engine, turn the
ignition switch “OFF” and push choke knob
fully inwards to “OFF” position. Open the
throttle fully and crank the engine with the
kick starter. Turn the ignition switch “ON
and open the throttle slightly, start engine
with the choke knob in "OFF" position.
Help assure your motorcycle's future
reliability and performance by paying
extra attention to how you ride during the
first 500 kms.
During this period, avoid full-throttle
starts and rapid acceleration

Related product manuals