20
A: Open the App and select your camera on the home page.
Click the share button on the home page or the "Share" in
the camera settings to enter the sharing page, and then click
"Invite" to generate a QR code. Your friends can now get
some of the access rights by scanning the QR code in your
phone.
FAQ
1.Q:Camera permission management: How to
invite family and friends to use my camera
together?
A: On Apple devices with iOS13 and above, you need to
turn on the "location permission" for the app in the system
settings and change it to "allow when using."
A: Please use a 2.4GHz wireless network. The device does not
support the 5GHz wireless n
etwork. Meanwhile, please set
the Wi-Fi authentication method to WPA2-PSK or other lower
level of security method. A password is required.
A: The built-in infrared lamp beads make the camera only
show some dim red lights when night vision is activated, but
the image quality is still clear under no light environment.
2.Q:Why doesn't the Wi-Fi name appear when I
connect to Wi-Fi?
4.Q:What are the requirements for Wi-Fi?
3.Q:Will the camera show red lights when night
vision is activated?
To Next Page
Loading...