Need help?Do you have a question about the Hertz ML Power 1 and is the answer not in the manual?
Details B channel sensitivity, filter mode (Full, Hi, Lo), mode selection (Stereo/Mono), and crossover frequency.
Details A channel sensitivity, filter mode (Full, Hi, Lo), mode selection (Stereo/Mono), and crossover frequency.
Explains the multiplier function for A channel crossover and the meaning of Power, Thermal, Overload, and Speaker LEDs.
Details PRE-IN and HI-IN input terminals for A and B channels, including auto turn-on switch.
Describes PRE-OUT, Speaker Outputs (A & B), Power (+BATT), Ground (GND), and Remote IN terminals.
Identifies protection fuses and the B channel input source selector.
Diagram showing PRE-IN A connections for a Woofer and Mid/Hi speaker setup.
Diagram illustrating PRE-IN A/B connections for driving front and rear speakers.
Diagram showing PRE-IN A and HI-IN B connections for front and rear speakers.
Diagram showing HI-IN A inputs and PRE-OUT outputs for connecting to another amplifier.
Diagram for HI-IN A+B inputs and PRE-OUT outputs, potentially for multi-amp systems.
Diagram illustrating HI-IN A+B connections for front and rear speakers.
Diagram for PRE-IN A connection to front speakers and a subwoofer in mono (bridge) mode.
Diagram for PRE-IN A+B connections for front speakers in dual mono (bridge) configuration.
Diagram showing HI-IN A inputs and PRE-OUT outputs for woofer and mid/hi speakers.
Recommendations for choosing speaker cable gauge based on power output and connection length.
Guidance on calculating and selecting appropriate power and ground cable sizes using provided tables.
Key safety points for installation, including electrical system, location, and handling the amplifier.
A step-by-step process for installing the amplifier, covering wiring and connections.
To Next Page
General
