Need help?Do you have a question about the Hertz HCP 4DK and is the answer not in the manual?
General| Input Sensitivity | 200mV - 6V |
|---|---|
| Band Pass | Yes |
| Remote In | Yes |
| Channels | 4 |
| Pre-In / Speaker-In | Yes |
| Fuse (AFS) | 25 A |
| Signal-to-Noise Ratio | >95dB |
| Channel Mode | 4-3-2 |
| High Pass | 50Hz - 500Hz |
| Low Pass | 50Hz - 500Hz |
| Frequency Response | 10Hz - 30kHz |
| Low Pass Filter | 50Hz - 500Hz |
| High Pass Filter | 50Hz - 500Hz |
To Next Page
