Heta INSPIRE 40 - Page 5

1
BETJENINGS- OG
OPSTILLINGSVEJLEDNING
DANSK DESIGN . D ANSK KVALITET . DANSK PRODUKTION
www.heta.d k
DK
INSPIRE 40 PEJSEINDSATS
Required tools are not supplied.
8150-0000-GB
CE
Heta A/S Jupitervej 22
7620 Lemvig Denmark
Production year:
2016
DS/EN 13229/A2:2004/NS 3058/3059
Serial No:
For closed operation
For installation with paneling intergrated into a building
Permitted fuel:
Spilt logs
Heat output
4 kW
Average flue outlet temperatur:
216 C°
Average CO emission (bases on 13% O2):
0.049 %
Emission of CO in combustion products:
614 mg/Nm3
Dust
8 mg/Nm3
Engery efficiency: 84%
Nox (mg/Nm³) 11 mg/Nm³
Dust (NS3058/3059) Weighted emission of particulates 1,65 g/kg
Distance to the sides (From the door edge) 150 mm
Appliance is suitable for multiple chimney allocation.
Only use the permitted fuel.
read the instructions carefully
DOP-Inspire 40 Insert-2215-2016
Inspire 40 Indsats
Product description:
For construction see installation instructions
The insert stove can be connected to a flue gas collecter
5
With your new wood stove you should find the following:
Operating /
Instruction manual
Heta glove
Data plate
Q.C. check
Standard V1,30
Flue collar
1525-0029
with mounting tool
1013-0864
Door handle
0016-0031
Ash pan handle
1020-0001
4 x M10x20 0008-1210
4 x M6x10 0008-0054
3 x M6x16 0008-1201
2 x M6x25 0008-1115
2 x M5x10 0008-2005