HETRONIC RX 14-HL User Manual

H-LINK
PROGRAMMING
MANUAL
For Pocket PC
RX 14-HL

Hetronic USA
4300 Highline Blvd., Bldg. A
Oklahoma City, OK 73108
405-946-3574 Fax 405-946-3564
MFSHL
www.hetronic.com
Hetronic Canada
45 Sinclair Avenue
Halton Hills, Ontario L7G 4X4
+1-800-816-4459 Fax +1-905-702-0501
© 2004 Hetronic, Inc.
All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form by any means without the written permission of Hetronic.
12/04

HETRONIC RX 14-HL Specifications

General

Operating Voltage	24 VDC ±20%
Current Consumption	≤ 100 mA
Operating Temperature	-20°C to +70°C
Enclosure Protection	IP65
Number of Relays	14
Sensitivity	-105 dBm
Output Type	Relay

Summary

Software Installation Procedure

Main Menu: File Handling

File - Save Settings

Procedure for saving current settings to a file on the Pocket PC.

File - Load Settings

Procedure for loading previously saved settings from a file into the program.

Transfer Options

RX Receiver Programming Instructions

Setup of Device Communication

Steps to establish communication between the Pocket PC and the receiver.

Download Procedure

Steps for downloading data to the module and handling potential errors.

Receiver Option Adjustments

Explanation of adjustable receiver options including Baud Rate, Timeout, Frequency, Logic, etc.

Upload Current Data to Module

Procedure to apply changes to the program by uploading data from Pocket PC to the module.

Baud Rate Configuration

Communication Timeout Settings

Main Contact Timeout

Frequency Settings

Logic Configuration

Output Assignment

Output Settings

Output Interlocking

Input Configuration

Address Configuration

Setting and changing receiver address, ensuring it matches the transmitter.

Multi-Address System

RF Module Settings