Hewland FTR - Page 5

PAGE 5 © Copyright Hewland Engineering Limited 2001-2009
Page
Fig. 1 Backlash Adjustment 10
Fig. 2 Differential Bearing Preload 11
Fig. 3 Pinion Shaft Setting 12
Fig. 4 Sequential Barrel Setting 13
Fig. 5 Powerflow Diff Assembly 14
Fig. 6 FTR-212-ADJ Assembly 15
Fig. 7 Graph relating turns to preload increase (FTR-212-ADJ) 16
Fig. 8 Casing & Associated Parts - 6 Speed (not FTRE ratios) 20
Fig. 9 Layshaft Assembly - 6 Speed (not FTRE ratios) 21
Fig. 10 Pinion Shaft Assembly - 6 Speed (not FTRE ratios) 22
Fig. 11 Selector Assembly - 6 Speed (not FTRE ratios) 23
Fig.12 Selector Assembly –6 Speed (FTREL Barrel only) 28
Fig.13 5 Speed Conversion Assembly - 6 Speed Gearbox 30
Fig.14 Casing & Associated Parts - 6 Speed (FTRE ratios) 32
Fig.15 Layshaft Assembly - 6 Speed (FTRE ratios) 33
Fig.16 Pinion Shaft Assembly - 6 Speed (FTRE ratios) 34
Fig.17 Selector Assembly - 6 Speed (FTRE ratios) 35
Fig.18 Casing & Associated Parts - 5 Speed (not FTRE ratios) 40
Fig.19 Layshaft Assembly - 5 Speed (not FTRE ratios) 41
Fig.20 Pinion Shaft Assembly - 5 Speed (not FTRE ratios) 42
Fig.21 Selector Assembly - 5 Speed (not FTRE ratios) 43
Fig.22 FTRS Additional Parts 48
Fig.23 Bearing Carrier Options 49
Fig.24 Tripod Differential Assembly 51
Fig.25 FTR-212-FD 52
ILLUSTRATIONS:-