Download Mission Planner
Before installing firmware to The Cube, please download latest version of Mission Planner from ArduPilot
website. Beta version is recommended for developers. Please download the corresponding version
according to your need.
Using Windows 10 as example, download the .msi installation file and run it as administrator. During the
installation process, some drivers will be installed together. Click "yes" if any dialog box pop up.
Connect Mission Planner to The Cube
To establish a connection you must first choose the communication method/channel you want to use, and
then set up the physical hardware and Windows device drivers. You can connect the PC and autopilot using
USB cables, Telemetry Radios, Bluetooth, IP connections etc.
To Next Page
Loading...