10
© HeyCafé Co., LTD. Version 1.0, Dec. 2019
Do not use sharp objects to scrape coffee residue of the grindstones.
Examine grindstones’ condition and replace them if necessary.
The replacement and assembly of a new set of grindstones is a delicate task.
Only skilled technical personnel should be allowed to perform grindstone removal and assembly.
If a more thorough clean is required, then the operation must be performed by skilled technician.
After all cleaning and replacing tasks are through make sure to assemble all of the parts and safety screws the
same way as they were disconnected. If anything does not fit back together or there are some leftover parts, do
not attempt to operate the grinder, call for the assistance of your technician.
To ensure long lasting grinder and great fresh taste of coffee, the cleaning procedure
as described above should be repeated routinely and at least once per month or as necessary
according the grinder’s usage and quality of beans.
END
STEP4
(Step 4 should be performed by certified
technician only)
Use a screw driver and nuts spanner to release
the bottom knife holder. Pull out the knife
holder. Discover the grinding house.
STEP5
Use a brush, a dry cloth,
and a vacuum cleaner to
clean the grinding
chamber thoroughly.
STEP6
Use a brush, a dry cloth,
and a vacuum cleaner to
clean the upper and
lower blade thoroughly.
To Next Page
