HF HF-LPD130 User Manual

http://www.iotworkshop.com 1 Copyright © 2013 . All rights reserved
High Flying Wi-Fi Module
Operation Guide
This document is applicable to the following series of products. This article
uses HF-LPT230 as an example to introduce the main software functions. The
differences will be specified. For the hardware description of the product and
some software functions, please refer to the user manual.
2.4GWi-Fi
HF-LPB130
HF-LPT230
HF-LPT130A
HF-LPT130B
HF-LPT330
HF-LPB135
2.4GWi-Fi
+BLE
HF-LPC300
HF-LPC330
2.4G+5G
Wi-Fi
HF-LPD100
HF-LPD130
2.4G+5G
Wi-Fi
+BLE
HF-LPF100

HF HF-LPD130 Specifications

General

Brand	HF
Model	HF-LPD130
Category	Wireless Router
Language	English

Summary

HARDWARE INTRODUCTION

TEST CASE

UART and Wi-Fi AP Mode Transmission

UART and Wi-Fi STA Mode Transmission

Explains the test topology and initial steps for connecting the module to a router in STA mode.

MQTT Transmission in STA Mode

FIRMWARE UPGRADE

Serial Port Firmware Upgrade

Describes how to upgrade firmware using the serial port via SecureCRT by setting baud rate and entering bootloader.

Internal Web Page Firmware Upgrade

Explains how to upgrade firmware using the module's internal web page by uploading firmware files.

External Configuration Web Page Firmware Upgrade

HF Udate Mass Production Tool Upgrade

Guides on downloading and using the HFUpdate mass production tool for firmware upgrades.

AT+UPURL Command Mode Upgrade

Details how to perform firmware upgrades using the AT+UPURL command with remote or local server files.

BLE THROUGHPUT