HF rotoss-PW11 - Product Overview; General Description; Device Parameters

Protoss-PW11 User Manual
http://www.hi-flying.com - 6 -
1. PRODUCT OVERVIEW
1.1. General Description
The Protoss-PW11 provides a RS485 interface to TCP/IP data transfer product. The Protoss-PW11
integrate TCP/IP controller, memory, Wi-Fi transceiver, RS485 and integrates a fully developed
TCP/IP network stack. Protoss-PW11 also includes an embedded web server used to configure
device.
The Protoss-PW11 using highly integrated hardware and software platform, it has been optimized for
all kinds of applications in the industrial control, smart grid, personal medical application and remote
control that have lower data rates, and transmit or receive data on an infrequent basis.
1.2. Device Paremeters
Table1. Protoss-PW11 Technical Specifications
Item
Parameters
System Information
Processor/Frequency
160MHz
Flash/SDRAM
2MB/352KB
Operating System
mbed
Network Protocol
Network Protocol
IP，TCP，UDP，DHCP，DNS，HTTP Server/Client，ARP,
BOOTP, AutoIP, ICMP，Web socket, Telnet, uPNP, NTP,
Modbus TCP
Security Protocol
TLS v1.2
AES 128Bit
DES3
Wi-Fi Interface
Standard
802.11 b/g/n
Frequency
2.412GHz-2.484GHz
Network Mode
STA/AP/STA+AP
Security
WEP/WPAPSK/WPA2PSK
Encryption
WEP64/WEP128/TKIP/ AES
Tx Power
802.11b: +18dBm (Max.)
802.11g: +16dBm (Max.)
802.11n: +15dBm (Max.)
Rx Sensitive
802.11b: -89dBm
802.11g: -81dBm
802.11n: -71dBm
Antenna
SMA Interface Antenna
Serial Port
Port Number
RS485
Data Bits
7,8