Hi-Link HLK-LD1115H-24G User Manual

Human Presence Sensor Radar
HLK-LD1115H-24G User Manual
V1.2
2021-12-6
Due to product upgrades or other reasons, the content of this document will be
updated. This document is intended as a guide only and neither the information nor
the recommendations stated shall constitute any express or implied warranty.

Hi-Link HLK-LD1115H-24G Specifications

General

Brand	Hi-Link
Model	HLK-LD1115H-24G
Category	Radar
Language	English

Summary

Product Overviews

Module Appearance and Interface

Module Performance

Debug Wiring

Debug Configuration and Host Usage

Configuration Directives

Details commands for setting module parameters like sensitivity and detection time.

Radar Output Interpretation

Explains the meaning of 'mov' and 'occ' outputs and signal strength.

Host Computer Usage for Evaluation

Guides on using the host computer software for module evaluation and status monitoring.

Sensitivity Settings and Parameter Saving

Explains how to adjust sensitivity and save configuration settings via the host computer.

Radar Installation and Testing

Wall Mounting Test Scenario and Coverage

Details the wall-mounted test setup, coverage, and initial sensitivity configuration.

Hanging Height Test and Sensitivity Configurations

Hanging Height Vertical Test Scenario

Describes the setup and testing for human presence detection in a hanging configuration.

Reference Sensitivity Configuration 2

Details the second reference sensitivity configuration for the radar module.

Reference Sensitivity Configuration 3

Details the third reference sensitivity configuration for the radar module.

Precautions

Appendix: Test Environment Display

Wall Hanging Test Environment

Visual representation of the test environment for wall-mounted installation.

Hanging Height Test Environment

Visual representation of the test environment for hanging installation.

Appendix: Power Supply Guidelines