Hi-Target V100 Getting Started

Product Introduction
8
1.3. Button operation
Most settings and operations of receiver are completed using a
button on control panel.
Figure 1-3-1
Description of power button operation
Operation name
Description
On
Shutdown status, long press the button one second to
boot, all lights are on
Off
Boot status, long press the button three seconds, all
lights double fast flash, release the button
Automatic setting station
Shutdown status, long press the button six seconds,
all lights double fast flash, release the button, the
instrument will automatically set the base station
Operating mode switching
Double-click the button to switch working mode,
double-click each time to switch between static and
RTK mode
Status inquiry
Click power button, power LED flashing times
displays power
Reset motherboard
Boot status, long press the button more than 6
seconds, all lights flash at the same time, release the
button, it will reset motherboard
Power button

Hi-Target V100 Specifications

General

Brand	Hi-Target
Model	V100
Category	Receiver
Language	English