To Next PageTo Next Page
Need help?Do you have a question about the Hi-Target V60 and is the answer not in the manual?
General| Channels | 220 |
|---|---|
| RTK Accuracy Horizontal | 8 mm + 1 ppm |
| RTK Accuracy Vertical | 15 mm + 1 ppm |
| Static Accuracy Horizontal | 2.5 mm + 0.5 ppm |
| Static Accuracy Vertical | 5 mm + 0.5 ppm |
| Wi-Fi | Yes |
| Battery Life | Up to 10 hours |
| Waterproof/Dustproof | IP67 |
| Weight | 1.2 kg |
| Frequency Range | GPS L1/L2, GLONASS L1/L2, BeiDou B1/B2, Galileo E1 |
| Initialization time | <10 s |
| Tilt survey | Yes |
| Data Format | CMR, CMR+, RTCM 2.x, RTCM 3.0, NMEA-0183 |
| Data update rate | 1 Hz, 5 Hz, 10 Hz |
| Communication Ports | RS232, USB |
| Storage Temperature | -40°C to +70°C |
Details the applicability of V60 GNSS receiver for measurement and its installation.
Highlights special operations requiring attention for safe usage.
Details the importance of adhering to warning contents to prevent damage and ensure safety.
States the company's disclaimer for improper product operation.
Introduces the V60 GNSS receiver, its features, and design.
Lists key features including certifications, multi-satellite support, and storage.
Provides guidance on careful usage and maintenance of the precise instrument.
Describes the four main sections of the product's exterior design.
Details the components of the control panel, including keys, display, and indicator lights.
Describes the components of the upper part of the receiver.
Details the components found on the bottom of the receiver.
Explains the function and connection details of the five-core and eight-core sockets.
Illustrates and describes the battery slot and its usage.
Specifies conditions to avoid for optimal receiver performance and longevity.
Lists sources of interference to avoid when installing the receiver.
Covers battery installation, removal, and power supply modes.
Details the procedure and precautions for charging the lithium battery.
Explains how to use the control panel for settings and operations.
Describes the main functions and operations performed via the control panel keys.
Explains key operations for navigating and displaying information on the LCD.
Details the procedure for editing parameters using the liquid crystal interface.
Explains how to turn off the LCD using keys when it's not needed.
Describes the procedures and indicator states for starting and stopping the receiver.
Explains the use of SIM/USIM cards for RTK operation and their installation.
Details how static data is stored internally and the file structure.
Explains how to use an SD card for data storage when internal memory is insufficient.
Describes how RTK data is stored in the controller and can be downloaded.
Explains how to reset the receiver to its delivery state.
Details the process of formatting the receiver and its consequences.
Explains how to upgrade the receiver's firmware using a USB drive.
Introduces the use of the V60 receiver for static measurement and data processing.
Provides step-by-step instructions for performing static measurements.
Explains how to download static data from the receiver using a USB drive.
Details the functions and procedures for using the GNSS receiver management software.
Lists the GNSS tracking capabilities, navigation output, and supported formats.
Specifies the accuracy for static, fast static, and RTK navigation modes.
Details the available communication and power interfaces on the receiver.
Describes the receiver's dimensions, weight, memory, and durability.
Specifies the environmental protection grade and operating temperature range.
Introduces the appearance and application of receiver interfaces and accessories.
Describes the Y-type data cable, its connectors, and usage for data transfer and updates.
