Introductions to Receiver
Figure 2-6
Environmental Requirements
The receiver shall operate in dry working environment
regardless of waterproof materials. In order to advance the
stability and service cycle of receiver, the receiver shall be
prevented from extreme environment, such as:
◇ Moisture
◇ Temperatures above 65 degrees centigrade
◇ Below - 40 degrees centigrade
◇ Corrosive liquids or gases
Electronic Jamming
The receiver shall not be installed in the place near to strong
electric power and interference signal, such as:
◇ Oil duct (spark plugs)
◇ Generator
◇ Battery-operated motor cycle
◇ DC-AC power supply changeover equipment
◇ Signal transmitting station (tower)
◇ Power supply
Warning: the receiver shall be installed 1 meter away
14
To Next Page
Loading...
