Hi-Target V90 Plus User Manual

Preface
Introduction
The introduction is applicable to V90 Plus products. V90 is a
new type of GNSS receiver used for measurement. The
introduction describes how to install, set and use V90
products.
In order to help you better use Hi-Target series products,
Hi-Target suggests you carefully reading the instruction. If you
are unfamiliar with V90 products, please refer to
www.hi-target.com.cn/en/
Tips for safe use
Note: the contents here generally are special
operations, needing your special attention.
Please read the contents carefully.

Hi-Target V90 Plus Specifications

General

GPS	Yes
GLONASS	Yes
Galileo	Yes
BeiDou	Yes
SBAS	Yes
Accuracy (RTK) Horizontal	8 mm + 1 ppm
Accuracy (RTK) Vertical	15 mm + 1 ppm
Accuracy (Static) Horizontal	2.5 mm + 0.5 ppm
Accuracy (Static) Vertical	5 mm + 0.5 ppm
Initialization time	< 10 s
Tilt survey	Yes
Data Update Rate	1 Hz, 2 Hz, 5 Hz, 10 Hz, 20 Hz
IP Rating	IP67
Data storage	8 GB internal memory
Communication	Bluetooth, Wi-Fi, 4G

Summary

Preface

Introduction

Explains the applicability of the introduction for V90 Plus products.

Tips for safe use

Provides important safety notes and warnings for the user.

Exclusions

Product Introduction

Product characteristics

Lists key features and specifications of the product.

Cautions for use

Highlights important safety precautions for using the product.

Introductions to Receiver

Receiver appearance

Describes the external look of the receiver and its components.

Control panel

Explains the functions and indicators on the receiver's control panel.

Environmental requirements

Specifies the operating conditions and environmental limitations for the receiver.

Elementary Operation

Control panel

Explains how settings and operations are managed via the control panel.

Function Key

Details the operation time and functions of the receiver's keys.

Static collection

Guides on performing static measurements and data collection.

Power Supply System

Battery installation and removal

Step-by-step guide for installing and removing the battery.

Battery, charger

Power supply

Charging

Charging operation

Step-by-step instructions for charging the battery correctly.

SIM Card/USIM Card

Installation card

Guides on preparing and installing the SIM/USIM card.

Micro SD card

Technical parameters

GNSS section

Details the GNSS system specifications and tracking capabilities.

Receiver Accuracy

Specifies the accuracy metrics for static and RTK positioning.

Interface

Lists the various interface ports available on the receiver.

GNSS Section

Receiver Accuracy

Interface

Function keys and indicators

Physical Characteristics

Environment

Socket and Main Accessories

Five-pin socket

Describes the five-pin socket, its function, and pinout.

Five-wire

Explains the five-wire cable for radio and data transmission.

Mini USB interface

Details the Mini USB port for connection and data transfer.

Schedule 4 USB virtual serial port driver installation

FCC Caution