HI-TARGET
24
3, the recording name, instrument number, instrument height, began
observing time.
4, boot, set the host to the static measurement mode. Satellite Blinking is
searching for satellites. Satellite into long bright lights from flashing status
indicates locked satellites. Status lights flash once every few seconds,
indicating that the acquisition of one epoch.
5, after the measurement is complete shutdown, shutdown time record.
6, download processing data.
Note ： You can not move the base in the acquisition, acquisition
parameters can not be changed.
Static data storage
GNSS static data collection is stored in V90Plus receiver 16GB internal
memory in the "static" letter, effective storage space 14GB, a total of three
folders: log, gnss and rinex, log folder stores log information, gnss folder data
storage format is * .gns, rinex folder store data format as a standard RINEX
format data files. You can use the random configuration of USB data cable
connected to the computer, use the U disk operation mode to copy static data
to your
computer.
To Next Page
Loading...
