Hi-Target V90 Plus - Electronic Bubble

HI-TARGET
28
corresponding voice prompts to upgrade if the upgrade fails again or contact
technicians.
Electronic bubble
After Hi-Survey in demo mode, the built-in GPS or connect V90Plus,
support electronic bubble measuring software interface schematic display
electronic bubble position, the user can select the automatic collection in
electronic bubble automatic measurement and automatic sampling sites
according to the electronic bubble state. Electronic bubble has the following
states:
Good center: bubble-set within tolerance, the center is good;
Wait center: Wait a user to adjust the pole, so that the bubble is
centered;
Wait for measuring: Wait center 2S, measuring mode, sampling sites
were in this state;
Wait Move: After the completion of the first sampling point, waiting
for the user to move the pole, will start moving at once measure after a
certain distance;
Tilt overrun: bubble-set within tolerance, deviation from the center
position.