Need help?Do you have a question about the Hi-Target vRTK and is the answer not in the manual?
General| IMU | Yes |
|---|---|
| eBubble | Yes |
| Hot Swap Battery | Yes |
| Positioning Accuracy RTK (Horizontal) | 8 mm + 1 ppm |
| Positioning Accuracy RTK (Vertical) | 15 mm + 1 ppm |
| Static Accuracy (Horizontal) | 2.5 mm + 0.5 ppm |
| Static Accuracy (Vertical) | 5 mm + 0.5 ppm |
| Tilt survey | Yes |
| Data format | CMR |
| Cellular | 4G |
Welcome to the vRTK receiver. Instructions describe product usage.
Important notices and warnings for safe operation and preventing damage.
Disclaimer regarding product use, responsibility, and potential deviations.
Contact information for technical support and assistance.
How to obtain the manual and electronic versions.
Feedback channels for product development and service improvement.
Introduces the vRTK receiver, highlighting its performance and new features.
Details the key features and benefits of the vRTK receiver.
Guidelines for careful use and maintenance of the precision instrument.
Describes the physical components and layout of the vRTK receiver.
Explains the functions of the device's buttons and LED indicators.
Details how to access and use the web-based management interface.
Outlines the process and settings for performing static data collection.
Describes the calibration-free tilt survey functionality.
Provides instructions for updating the device's firmware.
Explains how to use the camera for image-based measurements.
Details the augmented reality stakeout functionality.
Lists detailed technical specifications for GNSS, system configuration, and accuracy.
Describes the Type-C cable used for firmware upgrades and data downloads.
Details the UHF radio antenna used with the internal UHF mode.
Information on the receiver's battery capacity and charging procedures.
To Next Page
