Need help?Do you have a question about the Hi-Tech All-U-Need GLASS/CRYSTAL and is the answer not in the manual?
Emphasizes reading warnings, saving instructions, and understanding setup/usage basics.
Covers workspace, eye protection, unattended operation, and avoiding impairment.
Details on disc lubrication, coolant, workpiece handling, and identifying hazardous materials.
Warns against water ingress, water backup, forcing tools, and disc spin-down.
Crucial safety step: disconnect power before any adjustments or maintenance.
Guides on unpacking, checking parts, and placing the machine on a stable surface.
Instructions for setting up the water cups, tubes, and spray shield.
Details on installing the disc bushing, backing plate, and diamond disc onto the arbor.
Covers starting the machine, adjusting water flow, and controlling water splash.
Using the coarsest disc for removing large amounts of material or shaping.
Utilizing the 600# disc to refine shape and remove scratches from the previous step.
Using the 1,200# disc to achieve a finely frosted surface and remove finer scratches.
Using the 3,000# disc for a smooth, hazy surface, prepping for final polish.
Applying final polish using the Tech-11 pad with 14,000# diamond paste.
To Next Page
General