1110
8. Display Introduction
9. How To Use The Display, Headlight & Horn
1. Press for 3 seconds to turn on the display. Your electric bike will be ON. Press again for 3 seconds to turn it off.
The display will automatically turn off when there is no operation or riding for 5 minutes.
2. Short press “+” or “-” button to change the assist level from 0 to 5. 0 is without assist. 5 is the max assist level.
3. When the display is on Short press to switch the display data in the multi-function area when riding.
4. When the electric bike is on, press and hold the ‘‘-’’ button, and the bike will enter towing mode at 3.7 mph.
Release the ‘‘-’’ button and the bike will exit towing mode. In towing mode, you just hold the bike and the bike
can walk automatically.
1. Press the light button to turn on/off the headlight
2. Press the horn button for horn control
Speed display
Controller failure
Brake
Motor failure
Voltage protection
Battery indicator
Cruise mark
Multi-function display area
Assist level
VOL:voltage
ODO:total mileage
TRIP:single meleage
TIME:working time
To Next Page
