1.3 System connections
1.3.1 Power supply connection
Use a 12V DC power supply capable of at least 2A per device, with IEC/EN 60950-1 approval. If additional
power consuming devices are included, make sure to use a power supply that is able to supply the total
power needed for all connected devices.
Note: It is best practice to use separate power supplies for the Signo 25B and the electric locks.
1.3.2 Network connection
Network connection to a network that has a server or a router configured for DHCP.
PLT-04900, B.1 7 March 2021
Powering
Trusted Identities
HID® Signo™ Biometric Reader 25B
User Guide
To Next Page
Loading...
