HID Signo 25B - Standalone Operating Mode Connections; Direct Connection to PC

1.3.3 Standalone operating mode connections
Signo 25B devices can be used in standalone operating mode.
Note: Limited to SDK partners.
1.3.4 Direct connection to PC
Direct connection to PC using an auto assigned IP address or a static IP address.
Note: It can take up to five minutes for this connection type to configure.
Note: Supported network installations can be found in the HIDBiometric Manager Administration Guide
(PLT-04029).
PLT-04900, B.1 8 March 2021
Powering
Trusted Identities
HID® Signo™ Biometric Reader 25B
User Guide