Hidea HDF2.5 User Manual

Trouble Recovery
7. Remove the starter case by pulling it towards you.
8.Install the fuel tank bracket by installing the bolts.
9.Install 2 bolts into the rear section of the fuel tank.
10.Prepare the engine for starting; Be sure the engine is in neutral and that the clip is attached to
the engine shut-off switch.
11.Turn the lever on the carburetor to operate the choke system when the engine is cold.After the
engine starts,return the lever to the original position.
50

Hidea HDF2.5 Specifications

General

Brand	Hidea
Model	HDF2.5
Category	Outboard Motor
Language	English