Need help?Do you have a question about the Hifonics zeus series and is the answer not in the manual?
General| Series | Zeus |
|---|---|
| Basket Material | Stamped Steel |
| Surround Material | Foam |
| Subwoofer Size | 12 inches |
| Impedance | 4 Ohm |
| Power Handling (RMS) | 600 watts |
| Peak Power Handling | 1200 watts |
| Frequency Response | 500Hz |
Key safety and placement advice before installing the amplifier.
Detailed steps for connecting power and turn-on wires to the amplifier.
Guidance on routing audio cables to prevent interference.
Using speaker wire inputs and automatic turn-on functionality.
How to set the input signal level for optimal performance.
Adjusting bass enhancement levels from 0 to 12 dB.
Switching phase between 0° and 180° for acoustic matching.
Setting crossover frequency and slew rate for the low-pass filter.
Connecting and using the remote controller for bass level adjustment.
Understanding the amplifier's protection mechanisms and indicator lights.
Verifying proper wiring and power connections for amplifier operation.
Identifying and resolving issues when the PROTECT LED is red.
Testing for audio signal output and checking RCA connections.
Troubleshooting noise issues when turning the amplifier on or off.
Resolving engine noise interference in the audio signal.
To Next Page
