High Tech Pet MS-5 - Activating Your MS-5 Electronic Pet Collar; Fitting the MS-5 Electronic Collar on Your Dog

___________________________________________________________________________________
2 www.hightechpet.com High Tech Pet Products, Inc.
Please Read All Instructions Carefully
1. Activating Your MS-5 Electronic Pet Collar
NOTE: the B3V1A Battery (pictured right) is the ONLY
battery that is compatible with the MS-5 collar. Do
not attempt to use any other battery in the MS-5 collar.
NOTE: Some collars are shipped with a battery pre-installed.
If the battery is not already pre-installed in the collar, install the
battery by following the instructions on next page.
2. Fitting the MS-5 Electronic Collar on Your Dog
• Place the collar on your pet
with the electronics at the
throat as shown.
• When properly tted, the receiver
collar should not move on the
dog, but also should not be overly
tight. You should be able to t
your ngers between the strap
and your pet’s neck.
Note: The collar needs to be positioned on the bottom of your
pet’s neck, facing down, in order to trigger the door and barriers
correctly.
Replacement B3V1A batteries are available at www.HighTechPet.Com