High Voltage VLF E Series - Step 4: Set VLF Measurement Source

ISO 9001 2008
The World’s Source for High Voltage Test Equipment
MADE IN THE USA
High Voltage, Inc. • hvinc.com • p. 518.329.3275 • f. 518.329.3271 • 31 County Route 7A • Copake, NY 12516 USA
Step 4: Check the VLF Measurement Source is set
to VLF-34E or VLF-65E
1. Push the blue button to enter Advanced screen
2. Scroll down to “Measurement Source”
3. Push down on the encoder or press the green button
4. Choose VLF-34E or VLF-65E (depending on model)
5. Push down on the encoder or press the green button