Hikari HW782TA - User Manual

Explains symbols used for danger, warning, and caution to attract user attention.

Details safety measures related to machine operation, environment, and power.

Instructions for safely unpacking the sewing machine and its components.

Details on safety devices including needle guards, motor cover, hand wheel, presser foot, and covers.

Instructions for applying oil by hand to specific parts for initial use or long idle periods.

Illustrates the correct path for threading all machine needles and loopers.

Procedure for draining old oil from the machine's oil pan.

Manual lubrication for the RP device when first used or after a long period of inactivity.

Instructions on how to raise the lever when not using the RP device.

Adjusting the pressure of the roller's presser foot for smooth fabric transfer.

Adjusting the amount of fabric fed to match the sewing machine's feed amount.

Adjusting the horizontal and vertical positions of the needle take-up.

Adjusting the position of thread guides for proper thread tension.

Adjusting the needle guard to change the shape of the thread loop.

Adjusting the decorative thread guide for proper thread path.

Steps to remove, install, and adjust the lower looper thread take-up.

Adjusting the height, front-to-back, and left-to-right positions of the needle guard.

Adjusting the decorative thread guide position relative to the needle guard.

Adjusting the decorative thread guide thread guide position.

Adjusting the amount of thread drawn out by the lower looper.

Adjusting the front-to-back position of the looper relative to the needle.

Adjusting the presser foot lift amount.

Detailed adjustments for various cutter components.

Adjusting the occlusal pressure of the upper cutter.