Need help?Do you have a question about the Hikari H9199 and is the answer not in the manual?
Explains hazard symbols (Danger, Caution) and general safety pictograms used in the manual and on the machine.
Covers essential safety precautions for machine use, including environmental needs, installation, and operational safety.
Details the warning labels on the sewing machine and their importance for safe operation.
Identifies and labels the main components of the sewing machine for easy reference.
Lists technical specifications, model variations, and recommended lubrication for the H9199 sewing machine.
Provides a comprehensive guide for setting up and installing the sewing machine and its components.
Specifies the required dimensions and drilling locations for the machine's table top.
Details the installation of essential parts like the oil pan and hinges for the machine setup.
Explains the correct procedure for lubricating the machine, including oil type and quantity.
Illustrates the proper wiring and connection of cables for the machine's electrical system.
Covers the crucial steps required to prepare the machine before starting sewing.
Step-by-step guide on how to correctly install the sewing machine needle.
Instructions for safely removing and installing the bobbin case.
Details the process of winding thread onto the bobbin correctly.
Explains how to properly insert the bobbin case into the rotary hook assembly.
Guides the user through the correct procedure for threading the upper thread.
Explains how to adjust the stitch length using the stitch length dial.
Describes the operation of the knee lifter for raising the presser foot.
Provides fundamental instructions for beginning and executing sewing operations.
Outlines the basic steps required to start the sewing process.
Explains how to use the back tacking feature for reinforcing stitches.
Covers adjustments and settings to achieve optimal stitch quality and appearance.
Details how to adjust upper and lower thread tensions for balanced stitches.
Explains how to set the presser foot pressure according to fabric requirements.
Guides on adjusting the length of thread remaining after automatic trimming.
Covers routine care and upkeep procedures to ensure the longevity of the machine.
Provides a daily checklist of cleaning tasks for maintaining the machine.
Instructions for correctly applying grease to specific moving parts of the machine.
Details the process for checking and adjusting the oil supply to the rotary hook.
Outlines essential adjustments for ensuring the machine operates at peak performance.
Explains how to adjust the position and tension of the thread take-up spring.
Describes how to adjust the arm thread guide for optimal thread control.
Details the procedure for setting the correct presser foot height.
Guides on adjusting the vertical height of the feed dog for proper fabric feeding.
Explains how to adjust the tilt angle of the feed dog for different fabric feeding needs.
Describes how to set the correct height for the needle bar.
Guides on synchronizing the timing between the needle and the feed mechanism.
Explains how to align the needle and rotary hook for correct operational timing.
Details the adjustments required for the thread trimmer mechanism, including cam and roller settings.
Provides solutions for common problems and issues encountered during machine operation.
General| Brand | Hikari |
|---|---|
| Model | H9199 |
| Category | Sewing Machine |
| Language | English |
To Next Page
