Hikmicro B Series - 1 Introduction; Version information; More information

HIKMICRO B Series• Release Notes
1
1 Introduction
The handheld thermal camera is an ideal solution which provides accurate
touch-free temperature measurement and heat distribution image display
for electrical predictive maintenance, building inspection, HVAC inspection,
manufacturing monitor, etc. HIKMICRO’s handheld thermal cameras have
been used widely in detecting temperature anomalies before detecting
radiator efficiency for HVAC inspection, searching for heat loss in buildings,
finding hot spots and invisible defects on mechanical or electrical systems
that could indicate a potential problem. They are also used for surveying
areas that are hard to reach with conventional measurement tools.
This document introduces new features and optimizations in V5.5.61 of B
Series.
Version information
Item
Description
Firmware Version
V5.5.61 build240205
Algorithm Version
V2.09.05
Models
B01, B10, B11, B20, B21L, BX20, B01S, B10S,
B11S, FB21
More information

Mobile Client: HIKMICRO Viewer (only for the camera models with Wi-Fi
and Hotspot)
https://www.hikmicrotech.com/en/industrial-products/hikmicro-viewer-
software/

PC Client for analysis and report: HIKMICRO Analyzer
https://www.hikmicrotech.com/en/industrial-products/hikmicro-
analyzer-software/

PC Client for USB Cast Screen: UVC Client
https://www.hikmicrotech.com/en/industrial-products/uvc-client/

Welcome to visit our website and see more Compatibility Lists.
https://www.hikmicrotech.com/en/support/download-
center/compatibility/