HIKMICRO B Series • Release Notes
2
Upgrade camera with USB
Before upgrading your camera, make sure:
Fully charge your camera
Auto Power-off function is turned-off to avoid accidental suspension
during upgrading.
1.
Download new firmware from our website
(https://www.hikmicrotech.com/en/industrial-products/b-series-handheld-
thermal-imager/), and save it to your PC.
2.
Use supplied USB cable (USB-C to USB-A) to connect the device to PC.
3.
Open the detected disk on your PC.
4.
Unzip the firmware, and copy and paste the .dav file to the root directory
of the disk.
5.
Disconnect the device from PC and reboot the device to start upgrading
automatically. The upgrading lasts several minutes, please wait for the
process to complete.
To Next Page
Loading...
