Hikmicro CHEETAH Series - 5. USB Connection; 6. App Connection; 7. Getting Started; Install Adapter

3
5. USB Connection
Steps
1. Turn on the device and make sure the hotspot function is
disabled.
2. Lift the type-C interface cover.
3. Connect the device to the power adapter using a type-C
cable to power on the device.
6. App Connection
 Live view
 HIKMICRO Academy
 Set parameters
 Upgrade device
 Access albums
 Capture snapshots and record videos
Android
iOS
7. Getting Started
Install Adapter
Note: Install an adapter if you want to connect the device to a daylight scope.