Need help?Do you have a question about the Hikmicro Cheetah C32F-RL and is the answer not in the manual?
General| Resolution | 384 x 288 |
|---|---|
| Frame Rate | 50 Hz |
| Pixel Interval | 12 μm |
| Aperture | F1.0 |
| Display Resolution | 1024x768 |
| Waterproof Rating | IP67 |
| Display | 0.39 inch, OLED, 1024x768 |
| Battery Life/Operating Time | 5 hours continuous running with CVBS and hotspot off (@25 °C) |
| NETD | < 35 mK |
| Battery Type | Li-ion rechargeable battery |
Provides instructions for using and managing the product and information about the manual.
Lists HIKMICRO's trademarks and other mentioned trademarks.
Outlines limitations of liability, warranties, and user responsibilities for product use.
Details FCC compliance, rules, and measures to correct interference.
States compliance with EU harmonized standards and lists applicable directives.
Emphasizes compliance with local electrical safety regulations for product use.
Provides guidelines for transporting the device safely to prevent damage.
Details requirements and precautions for using the device's power adapter and supply.
Covers battery type, handling, charging, storage, and disposal to prevent hazards.
Describes the digital night vision monocular's features and capabilities for professional hunters.
Details the primary functions: distance measurement, client software connection, reticle correction, and display modes.
Introduces the visual description and illustration of the digital night vision monocular.
Explains how to connect the device to a power adapter or PC using a Type-C cable.
Provides steps to install the adapter onto the device by aligning dots and rotating a ring.
Details the process of adjusting the focus ring for a clear image.
Explains how to adjust the screen brightness using the menu and wheel.
Describes how to adjust image contrast via the menu and wheel.
Explains the Smart IR function for adjusting overexposed images in bright environments.
Details the method to capture still images using the device.
Explains how to enable or disable the audio recording function for videos.
Describes how to start and stop video recording directly from the device.
Covers enabling prerecording to capture events before and after activation.
Explains how to check device details like version and serial number.
Provides instructions for upgrading the device firmware via PC connection.
Details the process to reset the device to its default factory settings.
Addresses issues related to the monitor not turning on, suggesting battery checks.
Guides users on how to adjust image clarity, referring to the focus section.
Lists common reasons for capturing or recording failures, like PC connection or low battery.
Helps troubleshoot problems with the PC not recognizing the device, checking cables.
Directs users to a QR code for obtaining reticle correction methods.
Points to a QR code for common serial port commands for HIKMICRO thermal cameras.
Provides a QR code for accessing the communication matrix of HIKMICRO thermal cameras.
To Next Page
