Digital Night Vision Monocular User Manual
12
Chapter 5 Picture and Video
You can manually record video or capture picture when displaying live view.
5.1 Capture Picture
In the main live view interface, press and wheel at the same time to capture images.
Note
When capturing succeeds, the image freezes for 1 second and a prompt shows on the display.
For exporting captured pictures, refer to Export Files.
5.2 Set Audio
If you enable the audio function, the sound will be recorded with the video. When there is too
loud noise in the video, you can disable this function.
Steps
1. In the main live view, hold the wheel to show the menu.
2. Rotate the wheel to select .
3. Press the wheel to enable or disable this function.
4. Hold the wheel to save and exit.
5.3 Record Video
In the live view interface, press the wheel to start recording, and press the wheel again to stop
recording.
Note
The recording time is displayed at left top of the image. For exporting recording files, refer to
Export Files.
5.4 Prerecord Video
After you enable this function and select the prerecording time, the device can automatically start
recording the 7, 10 or 15 seconds before the recoil-activation and end recording the 7, 10 or 15
To Next Page
Loading...
Need help?
General
