Hikmicro Cheetah C32F-RL User Manual

Digital Night Vision Monocular User Manual
9
In menu mode, rotate the wheel to select and press the wheel to enable this function.
3.5 Set Display Mode
You can select different display modes in different scenes.
Hold in live view interface to switch display modes. Day, night, defog, and auto are selectable.
Figure 3-2 Display Mode
Day
Night
Auto
Defog
3.6 Set OSD
You can choose whether to display the OSD information on the live view interface in this function.
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select , and press the wheel to enter the OSD setting interface.
3. Rotate the wheel to select the OSD information you want to display or not.
4. Press the wheel to enable or disable the selected OSD information.
3.6.1 Synchronize Time
Steps
1. Hold the wheel to show the menu.
2. Rotate the wheel to select , and press the wheel to enter the time setting interface.
3. Press the wheel to switch the time system, and rotate the wheel to select the time and date to
be synchronized.
4. Press the wheel to select the hour, minute, second, year, month, or day to be synchronized.
5. Rotate the wheel to change the hour, minute, second, year, month, or day selected, and press
the wheel again to finish the setting.
5. Hold the wheel to save settings and exit.

Hikmicro Cheetah C32F-RL Specifications

General

Brand	Hikmicro
Model	Cheetah C32F-RL
Category	Monocular
Language	English