Digital Night Vision Monocular User Manual
5
2. Insert the battery into the battery compartment with the positive mark inward.
Figure 2-4 Install Battery
3. Turn the battery cover clockwise to tighten it.
Figure 2-5 Close Battery Cover
Note
Remove the battery from the battery compartment if the device is not used for a long time.
2.5 Install Daylight Scope
You can use the device together with a daylight scope to view the target clear in daytime.
Steps
1. Install the daylight scope into the transfer ring as arrow 1.
2. Lock the buckle to fix the daylight scope as arrow 2.