Digital Night Vision Monocular User Manual
viii
● DO NOT swallow the battery to avoid chemical burns.
● DO NOT place the battery in the reach of children.
● The battery cannot be charged with external power source directly.
● The device cannot be charged, please use the supplied charger to charge the battery.
● Please purchase the adapter by yourself. The using environment of the adapter should be
consistent with that of the device.
Maintenance
● If the product does not work properly, please contact your dealer or the nearest service center.
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
● Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
● Clean the lens with soft and dry cloth or wiping paper to avoid scratching it.
Using Environment
● Make sure the running environment meets the requirement of the device. The operating
temperature shall be -30°C to 55°C (-22°F to 131°F), and the operating humidity shall be 95% or
less.
● DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp
environments.
● This device can only be safely used in the region below 2000 meters above the sea level.
● Avoid equipment installation on vibratory surface or places subject to shock (neglect may cause
equipment damage).
● DO NOT aim the lens at the sun or any other bright light.
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
To Next Page
Loading...
Need help?
General
