Thermal Monocular User Manual
40
environment, which may result in an explosion or the leakage of
flammable liquid or gas.
Do not subject the battery to extremely low air pressure, which may
result in an explosion or the leakage of flammable liquid or gas.
Dispose of used batteries according to the instructions.
Confirm there is no flammable material within 2 m of the charger during
charging.
DO NOT place the battery near heating or fire source. Avoid direct
sunlight.
DO NOT place the battery in the reach of children.
DO NOT swallow the battery to avoid chemical burns.
Maintenance
If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
Wipe the device gently with a clean cloth and a small quantity of
ethanol, if necessary.
If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the device may be impaired.
Clean the lens with soft and dry cloth or wiping paper to avoid
scratching it.
Using Environment
Make sure the running environment meets the requirement of the
device. The operating temperature shall be -30 °C to 55 °C (-22 °F to
131 °F), and the operating humidity shall be 95% or less, no condensing.
DO NOT expose the device to high electromagnetic radiation or dusty
environments.
DO NOT aim the lens at the sun or any other bright light.
When any laser equipment is in use, make sure that the device lens is
not exposed to the laser beam, or it may burn out.
Place the device in a dry and well-ventilated environment.
Avoid equipment installation on vibratory surface or places subject to
shock (neglect may cause equipment damage).
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
To Next Page
Loading...
Need help?
General
