Hikmicro Falcon Series User Manual

Thermal Monocular User Manual
6
2.3 Power On/Off
Power On
When the device is connected to cable or the battery is enough, hold to
power on the device.
Power Off
When the device is turned on, hold to power off the device.
Note

Power-off countdown will appear when you power off the device. You
can press any key to interrupt the countdown and cancel the power-off.

Automatic low battery power-off cannot be canceled.
Auto Power Off
You can set the auto power off time for your device.
Steps
1. Hold to show the menu.
2. Go to Advanced Settings, and select General Settings.
3. Press or to select , and press to enter the
configuration interface.
4. Press or to select the auto power off time as required.
5. Hold to save and exit.
Note

See the battery icon for the battery status. means the battery is
fully charged, means that the battery is low.

When the low power note shows, charge the battery.

The auto power off takes effect only when the device enters the
standby mode and the device isn’t connected with HIKMICRO Sight app
at the same time.

The auto power off countdown will start again when the device reenters
standby mode, or the device is restarted.

Hikmicro Falcon Series Specifications

General

Brand	Hikmicro
Model	Falcon Series
Category	Monocular
Language	English