Handheld Thermal Monocular Camera User Manual
11
3.9 Correct Defective Pixel
The device can correct the defective pixels on the screen which are not performed as expected.
Steps
1. Hold to show the menu.
2. Select .
3. press to select the offset. The offset refers to the moving length of cursor.
4. Press or to select the moving direction.
5. Press to move the cursor to the position of dead pixel. Hold to correct the dead pixel.
Note
If the menu blocks the dead pixel, hold to perform mirror display.
3.10 Set OSD
In the menu interface, press to display or hide the OSD information.
To Next Page
Loading...
