Trail Camera M15 User Manual
22
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
● Wipe the device gently with a clean cloth and a small quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the device may be impaired.
● It is recommended to reboot the device every 2 hours when using it to ensure the device
performance.
Using Environment
● Make sure the running environment meets the requirement of the device. The operating
temperature shall be -20 °C to 55 °C (-4 °F to 131 °F), and the operating humidity shall be 5% to
90%.
● Place the device in a dry and well-ventilated environment.
● DO NOT expose the device to high electromagnetic radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright light.
● When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
● Avoid equipment installation on vibratory surface or places subject to shock (neglect may cause
equipment damage).
Emergency
● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict, Binjiang District, Hangzhou,
Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
To Next Page
Loading...
Need help?
General