4
English
SPECIFICATIONS
Voltage (by areas)* (110 V, 220 V, 230 V, 240 V)
Power input 600 W*
No load speed
0 – 2500 min
–1
Drill chuck capacity 10 mm
Capacity
Steel Twist Bit 10 mm
Wood
Flat Spade Bit 32 mm
Auger Bit 25 mm
Weight (without cord)
Spec. for keyed chuck 1.4 kg
Spec. for keyless chuck 1.4 kg
*
Be sure to check the nameplate on product as it is subject to change by areas.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
D10VC3 : Drill
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling facility.
V Rated voltage
P Power input
n
0
No-load speed
Switching ON
Switching OFF
Lock
Switch locks to the “ON” position.
Change rotation speed - High speed
Change rotation speed - Low speed
Disconnect mains plug from electrical outlet
Class II tool
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed in the below.
(1) Chuck wrench (Spec. only for keyed chuck) ................1
Standard accessories are subject to change without notice.
APPLICATIONS
Drilling in metal, lumber and plastics.
0000BookD10VC3.indb40000BookD10VC3.indb4 2021/04/0816:36:372021/04/0816:36:37
To Next Page
Loading...
