VC2000 Series Vision Controller User Manual
26
8.4 Why the system is blue screen or crashes, or frequent
reboots?
Problem
The system is blue screen or crashes, or frequent reboots.
Solution
●
Reboot the device.
●
Try to solve the problem according to the error codes and hints of blue screen.
●
Reinstall operating system again. The default system of the device is 64-bit Windows 10.
Contact technical support to get system files.
8.5 Why there is no signal feedback of GPIO input and
electrical level change?
Problem
There is no signal feedback of GPIO input and electrical level change.
Solution
●
Check if the signal source has any edge signal trigger; check if the parameters are
correctly configured (for example, filter parameter, mode configuration delay).
●
If the electrical output level does not change, check if the wirings are correct, and check
if the parameter settings are enabled.
●
Replace the device and check if the IO port is burned out.
To Next Page
