AX PRO User Manual
33
Tag Management
After adding Tags/tags to the wireless AX PRO, you can swipe the Tag to arm or disarm all the
detectors added to specific area(s) of the AX PRO, and clear alarms.
Steps
1. On the device list page, tap the AX PRO and then log in to the device (if required) to enter the
page.
2. Tap → User Management → Tag to enter the Tag Management page.
3. Tap + to add a Tag.
4. When hearing the voice prompt "Swipe Tag", you should present the Tag on the AX PRO Tag
presenting area.
● When hearing a beep sound, the Tag is recognized.
● The Tag will be displayed on the Tag page.
5. Optional: Tap a Tag to enter the Setting Page.
6. Tap Edit Icon to edit the Tag name.
Note
● If you log in as an installer, skip this step. Editing Tag name is only available to administrator.
● The name should contain 1 to 32 characters.
7. Slide Enable Tag..
8. Select a linked user.
9. Select the Tag type
Note
Different linked users have different Tag permissions.
Operation Tag
You can swipe the Tag to arm or disarm.
Patrol Tag
When you swipe the Tag, the system will upload a record.
10. Optional: Tap Delete to delete the Tag.
User Management
The administrator and the installers can manage users. If you are the administrator, you can add,
edit, and delete users, and assign different permissions to the newly-added users. If you are a
To Next Page
Loading...
Need help?
General
